Town Car air spring solenoid O rings installation

[Town]

Most all Town Cars from 1990 use an air suspension system that is very similar for all models. This article deals with the installation of the O rings used on the air spring solenoids. The small O ring used in sealing the high pressure air line to the drier uses the same procedure as for the high pressure line into the spring solenoid.

The procedures are included in the attached document.

Good luck.

 

[Slick Fan]

That's nice, detailed info in that attachment.
Thanks for posting this, Town!

 

[TweekerHunter98]

Does anybody know what size the O-rings are for the Air solenoid? Thanks in advance.

 

[Norms1stTC]

Does anybody know what size the O-rings are for the Air solenoid? Thanks in advance.

Biggest to smallest: #6 #16 #60

______________________________

Help support this site so it can continue supporting you!

 

[TweekerHunter98]

Biggest to smallest: #6 #16 #60

Thank you very much. I just figured it was cheaper to run down to Ace Hardware and get some good O-rings as opposed to waiting for them to Ford or eBay or Amazon or what have you. Thanks again and have a great one.