Town Car air spring solenoid O rings installation

Town

Senior Member
4,398
121
63
Ottawa Ontario Canada
Most all Town Cars from 1990 use an air suspension system that is very similar for all models. This article deals with the installation of the O rings used on the air spring solenoids. The small O ring used in sealing the high pressure air line to the drier uses the same procedure as for the high pressure line into the spring solenoid.

The procedures are included in the attached document.

Good luck.
 

Attachments

Your email address will not be publicly visible. We will only use it to contact you to confirm your post.

HTML

Top