Lincoln Continental LED emblem pics

[NicTLg]

So I did a few upgrades recently.

This is one of them.

I'm loving it!

 

[AaronZ]

Oh, very nice! How was installation? I’ve heard you have to remove the bumper.

 

[NicTLg]

Oh, very nice! How was installation? I’ve heard you have to remove the bumper.

Installation was kind of a pain, but mostly bc the guys I hired didn't watch the videos or listen to me about the easiest way to do it. You have to almost remove the bumper, at least the top and sides so you can tilt it forward.

 

[DomDoobie]

Where did you get the lighted Lincoln logo ? Where did you connect it for power ? I might like to do that to my Corsair grille

______________________________

 

[KnightSnake]

Looks great! Where did you get it.

 

[NicTLg]

Looks great! Where did you get it.

RAYMAX Luminous Gear

We focus on product development of car lighting products Floating Caps LED coaster，LED Emblem, LED handle

www.raymaxgear.com

 

[DomDoobie]

Thanks for posting that. They don’t have it for Corsair without 360 camera. I will contact them and see if like an MKZ one without camera is the same size

 

[NicTLg]

Thanks for posting that. They don’t have it for Corsair without 360 camera. I will contact them and see if like an MKZ one without camera is the same size

I found a way to wire this to the parking light (blue and white wire coming off the Driver's side headlight), so it comes on when you unlock the car or remote start it now. So sick! Watch the video.

______________________________

 

[NicTLg]

Oh, very nice! How was installation? I’ve heard you have to remove the bumper.

I had to get into it a second time to replace the bracket the first guy broke (he wasn't being careful, it shouldn't have been an issue). The second time, by myself, was much easier. I just removed the clips from the wheel well areas and the 2 screws holding the bumper to the fenders, then the clips and screws holding the bumper to the frame (above and below the bumper), and used some soft microfiber cloths to provide some space between the bumper and the car. I was able to get my hand behind the emblem easily enough to replace the broken bracket and tighten everything up properly this time. Took maybe an hour, it would have been less with a second pair of hands. It helps to have the trim popper tool. You'll also need a socket set (I think it was 8mm and 10mm), philips screwdriver, and torx, maybe a T10. There is a good video of a guy in Texas if you search YouTube. He has a gray Black Label Conti.

 

[MarkX]

Well done! I'll call you when I want mine done.

 

[NicTLg]

Well done! I'll call you when I want mine done.

I'll definitely help with any advice and guidance that I can from the West Coast. I won't be able to help in person, since you're about 3k miles from me, haha.

 

[Conti19]

I'll definitely help with any advice and guidance that I can from the West Coast. I won't be able to help in person, since you're about 3k miles from me, haha.

Just a question how did you do your emblems did you use rap or did you plastic dip

______________________________

 

[Eurythmian66]

I did mine too. Installation is a pain. But if you take your time and stay organized it is worth it. Best upgrade in my opinion. Got mine thru RAYMAX as well.

 

[DomDoobie]

I did mine too. Installation is a pain. But if you take your time and stay organized it is worth it. Best upgrade in my opinion. Got mine thru RAYMAX as well.

Nice !