2020 Nautilus KM to MPH

[ozzlet]

I purchased a 2020 Nautilus and found it is from Canada. The display shows MPH/KM. Is there a way to remove the KM? I can use it but it would be better if it was by itself and larger. Thanks in advance.

 

[peterk9]

Welcome to the Forum.

Have you set MPH in the settings? I've never played around with those settings so I don't know how they affect the actual viewing of them.
I'm guessing that those made for sale in the U.S. would also have the same option?

Peter

 

[bbf2530]

I purchased a 2020 Nautilus and found it is from Canada. The display shows MPH/KM. Is there a way to remove the KM? I can use it but it would be better if it was by itself and larger. Thanks in advance.

Hi ozzlet and welcome to the Lincoln Forums. Yes you can use the Driver Information Center settings to remove the KMph readout.

The Owners Manual explains how to change the many Display settings, or you can sit in the vehicle and toggle through the Display settings in order to learn how and where all the myriad settings are in your new vehicle. That is what I did when I purcahse my MKZ.

If you do not have the hard copy of your Owners Manual, you can download the PDF version here: https://www.fleet.ford.com/parts-service/resources/owner-manuals/

You may also want to register your vehicle and join the actual Lincoln Owners website located here: https://www.lincoln.com/support/

Welcome again and good luck.

 

[ozzlet]

Ok, so i tried to change it. I have MPH/KM on the screen. I would like to get rid of the KM. Maybe i am missing something.

______________________________

 

[peterk9]

Ok, so i tried to change it. I have MPH/KM on the screen. I would like to get rid of the KM. Maybe i am missing something.

I don't believe that is possible, at least not in the Setting. The reason is likely because the vehicle was built for the Canadian market where KM is the standard. Although I'm not positive, I'm guessing the same thing would apply to those made for the American market where MPH would still show if you changed the setting to KM. Perhaps it can be done with FORScan. If changed with FORScan, I don't know how or if it will affect the odometer reading.
You likely also have DRL activated full-time as they are mandatory here.

Peter

 

[ozzlet]

Thank you all for the info. I am planning on a trip to the delaer with some other issues. I will let you know.